Pre-installed pressure Single-Use-Sensor - if needed !
Its common to install, integrate a pressure sensor to measure DeltaP / ∆P pressure drop/increase along the HFF in a perfusion setup. This important measure is though performed by the Clotho Drive Unit WITHOUT external pressure sensors.
Measure Trans-Membrane-Pressure (TMP) or DeltaP / ∆P pressure along the HFF. Such data is of importance to determine increasing membrane fouling. Measuring TMP over or ∆P along the HFF indicating potential straw, lumen blockage. Important information - when HFF are combined with Clio or Thalia SUPs and driven by Clotho, who measure DeltaP / ∆P, cleaning cycles can be achieved otherwise pressure over the HFF increases constantly.
Examples of how customized installment of the PendoTech or the Utah Medical Luer-Lok pressure sensors could be arranged.
- Between SUP and the HFF
- After the HFF exit port being the retentate
- After the HFF harvest exit port being the permeate
