VisiWell™ for simple use with the VisiFerm™ optical oxygen sensor range 0-300 % saturated.

• In-house manufactured and installed VisiWell non-invasive Single-Use-Well (SUW) with the unique optical active black spot on the polymer end-cap.
• The user insert their own re-useable VisiFerm™ DO RUS (without Stainless Steel end-cap) into the non-invasive SUW.
• VisiWell™ format is for standard PG 13.5 x 120 or 225 or 320 or 420 model VisiFerm RUS.

The observant viewer do notice that the Stainless-Steel end-cap on VisiFerm is removed and the optical black spot is now visible on the VisiWell plastic part.

VisiFerm™ optical DO Re-Usable-Sensor (RUS) is available in the analogue version (short) and the digital ARC version (long).

Here shown model 120 and model 225 and both with VP8 connector. 

PolarWell™ for simple use with most brands of Polarographic, Ampheometric principle DO sensors.

• In-house manufactured and installed PolarWell non-invasive Single-Use-Well (SUW) with a unique semi-permeable silicone membrane on the tube end. 
• Insert your own DO Re-Useable-Sensor into the non-invasive SUW. 
• No extra liquid is needed. No removal of sensor cap is required. 
• PolarWell™ format is for standard PG 13.5 x 120 or 220 or 320 mm size DO RUS.

Polarographic DO RUS with typical the 4 wire T82 / D4 classical type of connector. An adapter from T82 / D4 to VP12 is available.

Re-Useable-Sensor (RUS) of relevant use / appear as standard when installed in the PolarWell:

• Mettler-Toledo InPro 6800 family
• Broadley-James OxyProbe family
• Hamilton OxyFerm family

Remember to remove O-ring and possible seal rings on Polarographic, Ampheometric DO RUS. O-rings and/or plastic washer will prohibit correct sensor installment.