Thermal control by electrical heating for size 3,200 and 13,000
Silicone electrical heating blankets designed by PerfuseCell, manufactured by www.flexelec.com and confectionized by PerfuseCell. Designed for PID control either relay or proportional control for max 50° liquid temperature. NOT to be used on an empty vessel! Supplied with 1.5 meter long silicone 2 line wire (no ground). The jacket has steel hugs at each end and one or more springs for tight attachment to the circumference of the P-SUB.
Dimension 75 x 350 mm
Designed to fit around OD 137 mm / 3200 P-SUB vessels. This size jacket is rated at 75 watt. Minimum 1.4 liter media is required. Be sure the blanket at any time is cooled by media behind the vessel wall.
- 110 VAC for any PCS - equipped with IEC C14 male connector
- 230 VAC for any PCS - equipped with IEC C14 male connector
Dimension 150 x 350 mm
Fits around OD 137 mm / 3200 P-SUBs. This size jacket is rated at 100 watt. Minimum 2 liter media is required. Be sure the blanket at any time is cooled by media behind the vessel wall.
- 110 VAC for any PCS - equipped with IEC C14 male connector
- 230 VAC for any PCS - equipped with IEC C14 male connector
Dimension 200 x 450 mm
Fits around OD 200 mm / 13000 P-SUBs. Power rated at 200 watt. Minimum 4 liter media is required. Be sure the blanket at any time is cooled by media behind the vessel wall.
- 110 VAC for any PCS - equipped with IEC C14 male connector
- 230 VAC for any PCS - equipped with IEC C14 male connector
More information to be found under Support/Accessories