SUBmerged™ ATF mini P-SUB size 500 ml keeps HFF free from fouling

  • Revolutionizing CellRetention P-SUB-500 ATF integrates Thalia SUP with SepraPor® HFF (Hollow-Fibre-Filter) directly into the SUB eliminating dead volumes
  • Direct coupled HFF with inverted innovative Thalia diaphragm Single-Use-Pump (SUP) eliminates shear stress, cell accumulation and well known HFF fouling
CellVessel ATF + Clotho
BIG

CellVessel ATF + Clotho

ATF 500 ml Clotho + Harmonia
BIG

ATF 500 ml Clotho + Harmonia

CellRetention 500 ATF SUBmerged
BIG

CellRetention 500 ATF SUBmerged

Left and centre photos: Clotho Drive Unit requires only the cable to the LASER and SUP drive gas to drive the Thalia A-SUP. Right photo: CellRetention P-SUB-500 ATF with customized SepraPor HFF and inverted TM60 angled A-SUP. Red LASER sensor mounted in a Re-Usable-Bracket above the dome of the Thalia TM60A A-SUP.

General features of CellRetention™ small size P-SUB-500:

  • No space consuming servo motor attached to the head plate - take advantage of Magnetic-Bottom-Drive (MBD)
  • Designed with 3 x PG 13.5 head plate ports and 6 ports for In&Out with small diameter hoses
  • Exchanged broth volume fully programmable and obtained velocity accurately measured by TM60 – no guessing
  • SepraPor HFF cartridge manufactured by Meissner Corp with pore 0.2 µm, 110 cm2 area, OD9.5 x 300 mm
  • The complete and pre-assemmbled P-SUB unit packed in dual film bags and precision irradiated – forget the autoclave
  • P-SUB dim is OD82 x 120 mm for Working Volume (WV) ranging from 100 ml up to 400 ml
  • Thermal control with the – Heating-Support-Foot (HSF) available for 110 VAC and 230 VAC

Further P-SUB mini features:

  • Comes with Magnetic-Bottom-Drive (MBD) or Head-Plate-Drive (HPD) for up to 250 RPM 
  • One pitch blade impeller
  • 3 small diameter weldable hoses length 600 mm 
  • 1 small short hose with 5 cm2 sterile filter for aeration
  • 1 small short hose with swabable valve for bottom sampling
  • 1 exhaust gas hose with 16 cm2 sterile filter
  • Electrical temperature control = Heating-Support-Foot (HSF) 

The 3 available PG 13.5 ports are used for:

  1. One port occupied by OneFerm pH Single-Use-Sensor (SUS)
  2. One port occupied by VisiWell Single-Use-Well (SUW) designed for VisiFerm (RUS) DO sensor
  3. One port occupied by SUBmerged kit 110 cm2, Thalia TM60

IPR covered by: CellRetention, CerPhragm, SUBmerged.

© 2026 PerfuseCell-Cronus A/S