Designed small P-SUB accessories
Both the CellRetention-500 and CellMembra-500 are fully designed, customized, manufactured by PerfuseCell. Thus more freedom in satisfying advanced requirements. In practice the Working Volume range from 100 ml to 400 ml within the same concept.
Thermal control
The Heating-Support-Foot (HSF) concept improves vastly mechanical stability for in specific the very light weight little P-SUB-500. HSF encapsulates the SUB circumference fully though allow visual inspection to the broth. As to the minimum air gap between HSF body and SUB wall the thermal control is as good as it gets - HSF height is only 45 mm.
Heating-Support-Foot for 500 ml P-SUB
perfect thermal control of 500 ml P-SUB
CellMembra-500 in HSF on MST
Stack of HSF available for 2 different voltages – 110 VAC and 230 VAC. Infrared camera photo showing same temperature inside the P-SUB media volume - same orange colour all over the media. Same setup of CellMembra or CellRetention in HSF with normal camera.
Parallel operation
Do you need like 4 or 8 or 16 P-SUB-500 operating in parallel? Mix freely between the 500 size or the 3 liter size P-SUBs and PR-SUBs and SUBs? Do you already have 4 or more Process-Control-System’s (PCS) available in your lab. Straight forward with all the accessories available from PerfuseCell. Its all Plug & Play!
Pack of 4 CellMembra on 4 MST
4 MST in parallel with 500 ml P-SUBs
close connected set of CellMembra
Whatever servo motor you may have the MST can adapt - with agitation for both 500 ml and 3 liter sizes. The width of 4 x P-SUBs mounted in HSF on MST is less than 0.8 meter (3 feet) space on your lab table.
Written 2022