Water jacket 3200

Re-Usable-Jacket for water heating of 3.200 ml vessel's

For water conveying Process-Control-System (PCS) use this stand-alone heat exchanger for Magnetic-Bottom-Drive 3.200 ml sizes. The RUJ is designed for integration with any of the three size Magnetic-Stirrer-Table's.

Re-Usable-Jacket (RUJ) for vessel size OD 137 x 270 with Magnetic-Bottom-Drive. The RUJ integrate a liquid pressure releaf valve for personal protection. Super advanced system manufactured all in polished Stainless Steel.

Specification: 

  • Operating temperature 5 - 60 °C
  • AISI 316 non-magnetic stainless steel construction
  • Typically for max 500 RPM
  • MAX jacket operating pressure 500 mBar – RUJ equipped with a spring loaded over-pressure, system protection valve set at 800 mBar
    Recommended water flow 1 litre/min per litre SUB WV
  • Side port in the P-SUB not possible

 

Different ways of liquid coupling to the RUJ accommodating any PCS.

Adapter - plastic adapter G3/8” male thread (with O-ring seal) to GL18 glass male thread for various STR, such as UniVessel.

Adapter - plastic adapter G3/8” male thread (with O-ring seal) to OD 10 mm hose barb for Applikon, Pierre Guerin, NBS, etc

Coupling - Rectus 21

  • Typical arrangement is female at bottom, male at top
  • Select single shut-off coupling set or fully open coupling set
  • G3/8” male thread with O-ring seal
  • Direct adaptation to Biostat orange/red hoses, such as used combined with UniVessel glass/steel STR - Nickel coated brass material 

More information to be found under Support/Accessories