Electrical jacket 3200

The best thermal control of all our 3.200 ml vessel's 

Heating-Support-Foot (HSF-E) that fits any of the 3.200 ml vessel's. Able to operate with small volumes starting from few hundred ml up to 2.000 ml. Allow installation of 3200 ml vessels like CellMembra and CellRetention with horizontal mounted PICO bio-mass Single-Use-Sensor.

The full range of 3.200 ml vessels fits perfect inside the HSF-E bolted on the MST-Compact. Note the 2 kilo heavy black servo motor is mounted on the MST and NOT on the P-SUB head plate! And hereby the servo motor do not interfere with sensor's and hoses on the otherwise typically packed head plate. NOT to forget safety is vastly improved.

The HSF-E is an aluminium construction allowing the Magnetic-Stirrer-Table (MST) to insure very stable support, superior agitation and thermal control, and ease of use. The MST isolates, protects the light weight 3200 P-SUB vessels from the often large and heavy servo motor.

The HSF-E integrates dual heating elements allowing user to select either 110-120 VAC or 220-230 VAC supply by rotating a switch. Response time for electrical heating is a 20 degrees Celsius lift in around 30 minutes. So, if you start at 18°C it takes 30 - 40 minutes to reach 37°C including 1 liter media.

Whatever happens - you can run the SUB dry, forget media, thermo couple fall out, PCS breaks down ...... this advanced HSF will never destroy the SUB and leak out media or burn your fingers when trying to solve the problem! 


HSF-E for P-SUB 3200 product specification and safety features:

  • 3 wire connection with ground - MUST be installed with correct power cabling, used with ground at end-user site!
  • Integrated thermal protection, which cut of at 75°C and connect again at 55°C. NOT for cultivation purposes – only for equipment and personal protection!
  • Thermally isolated from MST (we strongly suggest to cover the SUB with bobble foil and avoid its naked!)
  • Integrated rotary switch for selecting 110/120 VAC or 220/230 VAC both rated at 135 watt
  • All model pn HSF-E mounted with IEC 320 C14 male socket
  • Special version available for 48 VDC power supply equipped with male M12-4 leg connector
  • Weight 1,5 kilo
  • HSF-2262-E + MST-Compact-ALU + media + servo motor + SUB = 8,7 kilo.
  • Fulfil the Low-Voltage-Directive (LVD) (2014/35/EU)
  • CE marked

Check our more details under Support/Accessories